Linux Duracell CPU load monitor Linux Duracell CPU load monitor is a CPU load monitor that uses an AA-battery disposable tester as its display.
Download

Linux Duracell CPU load monitor Ranking & Summary

Linux Duracell CPU load monitor Tags

monitoring CPU CPU monitor CPU load Linux Duracell

Linux Duracell CPU load monitor Description

Linux Duracell CPU load monitor is a CPU load monitor that uses an AA-battery disposable tester as its display. The Linux Duracell CPU load monitor is a program that drives a Duracell or Energizer on-battery tester to display the CPU load of a system.It can be easily adapted to display other things that can use a slow bar graph kind of display that varies between 0% and 100%.Instructions to hack a AA-battery tester and turn it into a computer display are included in the distribution. Requirements: · An AA Duracell battery with a tester. Energizer testers should work too, but I haven't tried. I got a pack of Duracell Ultra M3 batteries, product code LR6-MN1500. · 1 x 3V power cube · 1 x 2 KOhm resistor · 1 x 4.7 KOhm resistor · 1 x 10 KOhm resistor · 1 x 4N25 or CNY17 optocoupler · 1 x BC547A or 2N2222A transistor · 1 x TIP41C transistor · 2 x 1N4004 diode · 3 x ON/OFF switche · 1 x female DB9 connector · 1 x breadboard (get it somewhat large if you build the simple display) · 1 x clear plexiglas CD case · 1 x Socket-7 heatsink (if you want to build the more precise display) · 4 x 10x3mm wood screws (if you want to build the more precise display)

Linux Duracell CPU load monitor Related Software